
Creating Outdoor Seating from an Existing Car Bay
Davilia Barber & Barista wanted to introduce an outdoor seating area for customers.
The available space beside the premises was an existing sloping car bay, requiring a level surface suitable for tables, chairs and customer use.
GRIDBASE provided a modular solution that could be installed over the existing ground without excavation or concrete footings.

Four Panels. 16 m². Adjustable Levelling.
Four GRIDBASE Gen 2 panels, each measuring 2 m × 2 m, were positioned and connected to create a 16 m² platform.
The adjustable supports accommodated the slope of the existing surface, while matching WPC fascia was installed around the exposed edges for a finished appearance.
The installation was completed by two people using the GRIDBASE modular platform system.

A Finished Outdoor Seating Area in Hours
The platform installation took approximately 2–3 hours, with an additional 30 minutes to fit the fascia.
The result was a level, 16 m² outdoor seating deck, providing Davilia with additional space for customers.
The installation demonstrates how GRIDBASE can convert an existing outdoor area into usable space without conventional concrete footings.
“Alex went above and beyond with helping me install the panels, it was obvious to see how proud he is about GRIDBASE and so he should be as it’s a fantastic product!”
David Aquilia
Owner, Davilia Barber & Barista

Cauldron Energy required a stable, level outdoor platform alongside site offices and accommodation at a remote Western Australian exploration camp.
The installation area consisted of hard, compacted red earth, making conventional ground preparation and permanent decking construction less practical.
GRIDBASE provided a modular platform solution without concrete footings, with the added advantage of being removable and redeployable as operational requirements change.

24 Panels. 96 m². No Concrete Footings.
The project used 24 first-generation GRIDBASE panels, each measuring 2 m × 2 m, creating a total connected platform area of 96 m².
The panels were transported to site by trailer. A three-person crew prepared and levelled the ground by hand before connecting the panels on adjustable supports and paver load pads.
The installation required no concrete footings.

Installed for Today. Redeployable for Tomorrow.
The completed 96 m² platform provided level outdoor access and usable space alongside the camp's accommodation and office buildings.
After approximately six months of service, Cauldron reported no obvious buckling or twisting of the panels.
Unlike a permanently constructed deck, the modular GRIDBASE platform can be disconnected, dismantled and redeployed to another location when site requirements change.
Panels can also be reconfigured or added to accommodate future operational needs.
“Everyone that has been to site has remarked on how good the decking panels are, and what a difference it has made aesthetically and functionally.”
Michael Fry
Director, CFO & Company Secretary
Cauldron Energy Limited

Following the installation of a modular home, the customer was left with an approximately 300 mm drop between the entrance and surrounding ground.
A raised platform was required to reduce the step height while creating a usable outdoor veranda for relaxing and entertaining.
Access to the backyard was restricted to a narrow passage alongside the existing house.

4 Panels. 16 m². Restricted Access.
Four first-generation GRIDBASE panels, each measuring 2 m × 2 m, were transported through the narrow side access using a lifting harness to carry them vertically.
The panels were positioned, connected and levelled alongside the modular home.
No concrete footings were required.

A Completed Modular Veranda in Approximately 3 Hours
The installation was completed in approximately three hours, including transporting the panels into the backyard, positioning, levelling and routing the electrical cables.
The finished 16 m² platform reduced the step down from the modular home and created a practical outdoor entertaining area.
As a modular system, the platform can also be dismantled, reconfigured, expanded or relocated if requirements change.
“ $3,600 versus a $16,000 traditional decking quote. Very impressed with your product.”

The property in North Yunderup presented a common residential challenge: a backyard with an approximately 250 mm drop from the existing concrete slab and ground that continued to slope away from the house.
The homeowner wanted to transform this uneven area into a practical, level outdoor space extending towards the clothesline.
The challenge was accommodating the change in ground elevation while avoiding the need for conventional concrete footings and extensive ground preparation.

GRIDBASE supplied and installed eight first-generation modular panels, each measuring 2 m × 2 m, creating a connected platform covering 32 m².
The panels were positioned and levelled using the system's adjustable supports. Concrete pavers were placed beneath the supports along the lower side of the installation, providing suitable bearing points where the ground dropped away.
This approach allowed the individual panels to be adjusted to create a consistent deck level across the sloping area, without constructing conventional concrete footings.

The completed installation created a continuous, level deck extending from the existing concrete slab towards the clothesline.
All eight panels were installed in approximately four hours, demonstrating how the modular system can simplify residential decking projects where uneven ground would otherwise require additional preparation.
The result was a practical 32 m² outdoor area that makes better use of the available backyard, with the added flexibility of a removable and reusable platform.
“They were extremely reliable, organised and proficient. My block has a slope to it and it was no problem for the team to make my outdoor space usable.”
— Homeowner, North Yunderup